raw materials / ferrous scrap

You are now searching Ferrous Scrap.

ORIGINS: U.S., WESTERN AND EASTERN EUROPE, C.I.S, AFRICA.

Available Standards

You are now checking Ferrous Scrap Quality 3A GRADE ACCORDING TO GOST 2787-86. This material, consist of Rails (fittings), joint, axles Plates, beams, hooks, corners and heavy melting, structural materials.

GENERAL PROPERTIES:

• Dimensions not to exceed 1500x500x500mm
• Weight of pieces Max.300kg.
• Thickness Min. 6mm
• Impurity, dust, dirt is allowed up to 0.50%
• Oversize Max. 2%
• Bulk Density Min. 0.60 MTon/m3

You are now checking Ferrous Scrap Quality HMS1 & 2.

GENERAL PROPERTIES:

- HMS No.1 100%
- HMS No. 1-2 (No.1 consist 80% - No.2 20%)
According to Institute for Scrap Recycling Industries (ISRI) standard codes:
This material, consist of Rails (fittings), joint, axles Plates,
beams, hooks, corners and heavy melting, structural materials.

ISRI, Steel Codes

• HMS #200 No. 1, heavy melting steel. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 x 24 inches (Charging box size) prepared in a manner to insure compact charging.
• HMS #201 No. 1, heavy melting steel 3 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch over in thickness individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging.
• HMS #202 No. 1 heavy melting steel 5 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness individual pieces not over 60 inches x 18 inches (charging box size) prepared in a manner to insure compact charging.
• HMS #203 No. 2, heavy melting steel. Wrought iron and steel scrap, black and galvanized, 1/8 inch and over thickness charging box size to include material not suitable as No. 1 heavy melting steel. Prepared in a manner to insure compact charging.
• HMS #204 No. 2, (same as #203 but max size 36 x 18 inches).
• HMS #205 No. 2, (same as #204, but free of sheet iron or thin gauged material).
• HMS #206 No. 2, (Same as #204, but max size 60 x 18 inches).

You are now checking Ferrous Scrap, Shredded.

GENERAL PROPERTIES:
 

• #210 Shredded Scrap: Homogeneous iron and steel scrap magnetically separated originating from Auto, unprepared No. 1 and No. 2 steel, misc. bailing and sheet scrap. Average density 70 per cubic foot.
• #211 Shredded Scrap: (Same as #210, but density 70 lbs per cubic foot).

(*) Corbus does not guarantee availability of listed products and sizes at all times. Listed products and sizes are only the most commonly used in the industry. Specific sizes may be offered for special projects.

company - products - facilities - contact
info@corbus.com.tr
Copyright © 2006 Corbus Ltd. All rights reserved